AI-driven building platform

Turn messy building data into decisions you can trust.

Start with one building, free. We set it up and run it at no charge, so you see what's overdue, what's coming and what it costs before you decide anything.

What Struxiva tells you

Know what's overdue, what's coming and what it costs, in every building.

Struxiva reads the inspection reports, invoices, service records and meter data your buildings already have, and turns them into a list you can act on. Every figure opens its source.

Example figures from Building A, a 168-apartment residential building. See it on one building →

Who it's for

Built for the people who answer for buildings.

Meet Building A

One building, four questions, answered from its own paperwork.

Building A is an example: 168 apartments, built in 2016, with the usual pile of inspection reports, invoices and meter readings. This is what Struxiva tells its manager.

Struxiva screen: Building A at a glance, with four overdue inspections and the energy classExample data
01

What's overdue?

Four statutory inspections are late. One by seven years.

Struxiva reads the service records and the intervals set by law, then lists what's overdue with the next step for each.

  1. 1How late each inspection is.
  2. 2The last record on file, and who did it.
Action items & deadlines →
Struxiva screen: four overdue statutory inspections for an example building
Overdue inspections, from the service records.Example data
02

What's coming?

Five services fall due in the next twelve months.

Each next date comes from the last record on file plus the interval, so the year ahead holds no surprises.

  1. 1When the next service is due.
  2. 2Where that interval comes from.
  3. 3One click to the action list.
Action items & deadlines →
Struxiva screen: services coming up in the next twelve months
Coming up: next due = last record + interval.Example data
03

What does it cost?

28 230 € in twelve months, 81 % of it to one contractor.

Every maintenance invoice is read and sorted by type of work and contractor, and the outliers are pointed out.

  1. 1What you paid, excluding VAT.
  2. 2A contractor with no tilaajavastuu report on file.
  3. 3Repairs you keep paying for.
Invoices & costs →
Struxiva screen: twelve months of maintenance invoices and what stands out
Invoices & costs: what stands out is flagged.Example data
04

What can be saved?

6 800–13 400 € a year, found in the meter data.

Connect energy data and Struxiva finds faults and savings, and shows exactly how each estimate was made.

  1. 1The saving, at reference prices.
  2. 2The meter data it rests on.
  3. 3How sure Struxiva is about it.
Needs meter dataFaults & savings →
Struxiva screen: a district-heating saving with the chart it is based on
Faults & savings: every estimate shows its working.Example data

See it in action

Watch it running on a real building.

How it works

From your documents to your first action list in about a week.

No migration project, no new hardware, no change to the systems you use. You send files; Struxiva does the rest.

  1. Day 1
    Step 1

    You share what you already have

    Inspection reports, condition assessments, invoices, service records, drawings and meter exports, in whatever shape they're in.

    PDF & scansExcel & CSVIFC & DWGMeter exports

    Your part: collect the files you have.

  2. During the week
    Step 2

    Struxiva reads and checks it

    AI extracts the facts, engineering rules check them, and every value stays linked to the page it came from.

    Facts extractedCross-checkedGaps flagged

    Your part: nothing.

  3. After about a week
    Step 3

    You work from the answers

    We walk you through the building's action list, costs and history on a call. It stays current as new documents arrive.

    Example: the overdue inspections list Struxiva produces

    Your part: a 30-minute walkthrough.

Free pilot

Your first building is free. Try all three steps on a building you know, at no cost and with no commitment.

FreeStart your free pilot

The platform

One autonomous platform, from raw building data to verified result.

Struxiva isn't a dashboard you have to feed. It ingests the data you already have, validates it, and runs detection, prediction and verification continuously, so the answers are waiting for you.

1

Ingest

Documents, models, drawings, invoices, meters and sensors, in the formats you have.

2

Validate

Cleaned, cross-checked and linked into one record, with every value traceable to its source.

3

Detect

Overdue work, defects, faults and waste, located to the system, floor or apartment.

4

Predict

Repair costs, failures, energy use and peak demand, before they arrive.

5

Verify

Every action measured against a clean baseline, so savings are proven.

Generative AI reads what's ambiguous; deterministic engineering code checks everything that has to be right. No AI output becomes a fact without passing that check. How the boundary works

Why trust it

Built to be checked, not just believed.

Every number in Struxiva can be traced, the method behind it is published, and your data stays in open formats.

Evidence on every figure

Every figure opens its source.

Select Evidence and Struxiva opens the exact page of the invoice, inspection report or condition assessment behind the number. Where documents disagree or a value can't be read, it says so instead of guessing. Every action and upload is logged with who made it and when.

Peer-reviewed

A method published, not just promised.

Our approach to extracting building knowledge from documents is peer-reviewed and published with open code, developed with Aalto University.

Read the research →

Recognition

Top Innovator, Smart Building Innovation World Cup® 2026.

One of 40 Top Innovators chosen from more than 90 applicants in over 40 countries.

See the list →

Open standards

Your data stays yours.

Built on open BIM/IFC and Brick standards rather than a proprietary schema, and available to your BMS, CAFM or ERP through an API.

Security & integrations →

Questions

What people ask before a demo.

Do we need sensors, new hardware or a new system?

No. The action list, repair plan, invoices and building history all come from documents you already have. Meter data adds energy analysis and forecasting, and sensors add fault detection and indoor-climate metrics. Struxiva tells you what your data supports. It works on top of the systems you already run and can feed your BMS, CAFM or ERP through an API.

Our documentation is incomplete and inconsistent. Will this work?

That's the normal starting point. Struxiva reads scanned PDFs, spreadsheets, drawings and models, reconciles them, and shows you where sources disagree or something is missing instead of guessing.

How long until we see results?

Once we have a building's documents, the first action list is usually ready within one week.

Is our data secure?

Struxiva runs on Google Cloud. Each organisation's documents are isolated at the storage level, uploads are encrypted in transit, and processing is checkpointed so nothing is lost mid-way. We're happy to walk you through data residency, retention and our data-processing terms. See also our privacy policy.

What does it cost?

Your first building is free. We set it up and run it at no charge, so you can judge the results on your own building. After that, pricing depends on the number of buildings and the data you connect, and we'll give you a quote.

Free pilot or demo

See your own building in Struxiva. The first one is free.

Choose a free pilot on one of your buildings, or a 30-minute demo call first. Either way you see the action list, costs and savings for a building like yours.

  1. Choose a free pilot or a demo, and tell us a little about your buildings.
  2. We reply within one working day.
  3. For the free pilot: send one building's documents, and within about a week we walk you through its real action list, costs and savings.

Prefer to talk now? info@struxiva.com · +358 44 982 2227

I would like

We use your details only to reply to your request. See our privacy policy.

Your first building is freeStart free pilot